To improve the rheological properties of fracturing fluids, crosslinker are usually introduced into polymer-based fracturing fluids.
SL-XLA1310 is a high Boron content delayed liquid Cross Linker. It is a solution for crosslinking guar, guar derivatives and other carbohydrate based fracturing fluids.
inquire now
To improve the rheological properties of fracturing fluids, crosslinker are usually introduced into polymer-based fracturing fluids.
SL-XLA1310 is a high Boron content delayed liquid Cross Linker. It is a solution for crosslinking guar, guar derivatives and other carbohydrate based fracturing fluids.
SL-XLA1310 is a suspension of slowly dissolving Boron particles and gives a typical crosslinking delay of 60 to 180s, depending on loading and other conditions.
SL-XLA1310 has a wide cross-linking range, cross-linking time can be adjusted, good sand carrying performance, It is suitable for underground fracturing construction of Medium/High temperature formation.
SL-XLA1310 is greatly affected by the PH of the solution, the higher the PH value, the stronger the stability of the complex. When PH value is high, only a small amount of complex is slowly dissociated at the beginning, that is, delayed cross-linking.
Compatible with most known fracturing fluids additives for use with all types of guar and guar derivatives. A compatibility test is always recommended before use.
Not hazardous to the environment.
Item | Indicator |
Appearance | Suspension solution |
Colour | Brownish-gray |
PH | 10-11 |
Odor | Odorless |
Specific Gravity | 1.3-1.6 |
Crosslinking time | 60-180s |
Recommended dosage: 0.1-0.3%.
The concentration is dependent on the polymer concentration, temperature and mix-water salinity.
Applicable pH range: 9-14.
Applicable temperature: 105-250℉(40-120℃)
SL-XLA1310 be packed in 200L HDPE or 1000L IBC drum. Keep it away from extreme conditions such as places near flames or direct sunlight.
Shelf life is 1 year.
