Hydraulic Fracturing Friction Reducer

SL-FR-607L is an anionic PAM revert emulsion designed for use in water-based fracturing fluids. SL-FR-607L can be used in a variety of well types including oil, gas, water, and injection wells. SL-FR-607L provides good friction reduction characteristics and is cost-effective for large multi- stage fracturing treatments.

SL-FR-607L is an anionic PAM revert emulsion designed for use in water-based fracturing fluids. SL-FR-607L can be used in a variety of well types including oil, gas, water, and injection wells. SL-FR-607L provides good friction reduction characteristics and is cost-effective for large multi- stage fracturing treatments.

SL-WGA00L is a high-yielding Guar Gum slurry for continuous or batch mixing of fracturing fluids. Its hydration rate is faster compared to CMHPG powder, and is easier to meter, disperse and hydrate in water.

DBNPA is a highly effective, broad-spectrum solid bactericide widely used in oilfield fracturing fluids, industrial water treatment, and other applications.

SL-WGA02L is a high-yielding CMHPG slurry for continuous or batch mixing of fracturing fluids.

SL-HVFR0660 is a suspension concentrate of anionic polymer in mineral oil. It has been developed to work in a wide range of friction reduction applications and can be used in both slickwater and high viscosity friction reducer (HVFR) applications.

To improve the rheological properties of fracturing fluids, crosslinker are usually introduced into polymer-based fracturing fluids.

The high-viscosity gel used in the fracturing construction process is generally prepared from vegetable gum (guar gum) or synthetic polymer.

SL-EXP4601 is an organic borate crosslinker, is suitable for water-based gel fracturing fluid system, can form high viscosity gel by crosslinking with hydroxypropyl guar gum.

Crosslinkers are generally introduced to polymer-based fracturing to improve rheological properties of the fracturing fluids. SL-EXP4901 is an organic boron zirconium composite crosslinker used for crosslinking guar-based fluids.

SL-EXP6605 is suitable for water-based gel fracturing fluid system.

SL-PH01 is an alkaline pH buffer, it can be used to adjust the pH range and crosslinking time required for fracturing fluid crosslinking to ensure the stability and effectiveness of fracturing fluids.

SL-PH02 is an acidic pH buffer, can be used to adjust the pH range and crosslinking time required for fracturing fluid crosslinking to ensure the stability and effectiveness of fracturing fluids.

Surface active reagents were generally used in aqueous-based stimulation fluids to lower the interfacial tension that restricts fluid flow in the rock matrix.

SL-K1212 is mainly used in oil and gas well fracturing, acidizing and other downhole operations,

Fluid and petrol-physical heterogeneities are encountered in most sandstone and carbonate formations.

Fluid and petro-physical heterogeneities are encountered in most sandstone and carbonated formations.

Linear gel may dehydrate due to exposure to high-temperature,

If the water used to prepare the fracturing fluid contains bacteria and enzymes, it may cause microbial corrosion,

While oil production technology continues to improve,

Some crude oils react with acid to form a black asphaltic sludge by the coagulation of unstable colloidal material in the oil.

During the operation of acidizing and fracturing in the oilfield,

Proppant-pack permeability can be severely damaged by gelling agents such as guar or its derivatives.

After the polymer gel enters the formation, it will cause certain damage to the formation and affect the production capacity of the oil well.

Proppant-pack permeability can be severely damaged by gelling agents such as guar or polymers.

Proppant-pack permeability can be severely damaged by gelling agents such as guar or polymers.

SL-EOR3024 is partially hydrolyzed polyacrylamide (PAM)